ADAM ELEMENTS PeAk II Braided USB-C to Lightning cable

A sync and charge premium tangle-free USB-C to Lightning cable that supports fast data transfer and very fast charging (up to 29W).

• Robust, durable cable for long-life usage

• High density braided nylon supports and protects the cable when bending and swinging

• Fast charging with up to 29 (14.5V/2A) and fast data transfer that’s perfect for usage with your MacBook or PC/Notebook with USB-C or Thunderbolt 3 connection

• Compatible with iPhone 5 and later models, iPad 4th gen and later models, all iPad Mini series, all iPad Air series, iPad Pro 1st & 2nd gen, and other devices with lightning connector.

ABOUT ADAM ELEMENTS

Adam Elements is a leading supplier of intelligent lifestyle solutions. The Taiwan-based company develops mobile, information and communication products, including mobile devices, peripherals for smart devices, smart wearable products and smart lifestyle equipment. In order to perfectly complement its high quality hardware, the company also develops software applications for a seamless and complete user experience. Adam Elements is currently active in several Asian and European markets, also as an authorized dealer of various smart mobile devices from international brands.

• ADAM ELEMENTS PeAk II Braided USB-C to Lightning cable

• Velcro Strap

• 3 Years Warranty

ADAM ELEMENTS WARRANTY GUIDELINES:

In general, damage caused due to inappropriate use, is not covered by warranty, obvious physical damage to the product is considered inappropriate use

Accepted for Warranty:

• Does not charge at all but no damage to the cable or connector is accepted. (Note: please try cleaning the connector pin on the lightning cable.)

• Shows unsupported but no damage to the cable or connector. (Note: please try cleaning the connector pin on the lightning cable.)

• Structural damage (weak point or easily damaged structure, ex: detached pin).

• Damage spotted upon package seal breach.

Not Valid for Warranty:

• Obvious damage to the connector or cable line.

• Color change after a period of time but the cable works.

iKlips series

Adam elements does not take any responsibility on any data stored on the iKlips by user, most of the connectivity issues are repairable, please contact service dept for solution.

Accepted for Warranty:

• Firmware update failed

• Error codes : 2307 (shows not supported)

• Shows 30x = (shows as USB DISK 53X under system info or device manager)

• Unsupport Files System, or unable to read/write data (Note: Please try reformatting iKlips in iKlips app)

• Snapped/Bent connector (one time replacement per customer only)

Not Valid for Warranty:

• Damage to the PCB or connector port (USB or Lightning)

• Any other obvious damage causing iKlips not working

CASA Hub Series

Accepted for Warranty:

• WiFi jamming issue

• Overheat more than 70c

• RJ45 port not working

• HDMI not working (Note: Please check If the connected laptop or device supports Displayport output)

• Type C connectivity issue

• Connectivity issue on any connectable ports

Not Valid for Warranty:

• Damage to the cable to structure

• Connecting or disconnecting Hub A01 from device causes USB hub connected device to reconnect or reset is expected. (it's normal)

TA502 Model

Accepted for Warranty:

• USB not charging

• Movable part missing or snapped with out obvious damage by other forces.

Not Valid for Warranty:

• Damaged due to using hair dryer

• Damaged due to voltage difference (using 110v stuff on 220v power plug)

• Fuse damage

• no electricity passing through anything

PA601 Series

Accepted for Warranty:

• Port not charging

• QC not working

• Type C charging rate cant not able to charge up laptop or battery. Type C on PA601 provide 5V 3A, if the connected device or battery requires more, there will be no charge at all

• Shows red when not connected (Note: Please disconnect all power for 10 seconds than reconnect)

• No device connected, but the indicator light flashes (Note: Please disconnect all power for 10 seconds than reconnect)

GoHealthy Series

Accepted for Warranty:

• Any damage spotted upon opening a brand new package

• Any of the sensor not working

Not Valid for Warranty:

• Battery stoket damage due to battery leak